Field Tile are available in the following nominal shapes and sizes:
1"
1"X8"
1"X6"
1"X4"
3"X6"
3"
2"
8"
See actual sizes below
4"
3"
4"X6"
2"X4"
X
X
X
1"X2"
1"X3"
X
6"
4"
| Series 100, 200, 300 | Series 400, 500 | |
|---|---|---|
| Nominal Size | Actual Size # per sq. ft. | Actual Size # per sq. ft. |
| 1" | 15/16" 127.55 | 7/8" 144.00 |
| 2" | 2 1/16" 30.09 | 1 15/16" 33.85 |
| 3" | 2 15/16" 15.35 | 2 3/4" 17.42 |
| 4" | 4 1/4" 7.52 | 4" 8.46 |
| 6" | 6" 3.84 | 5 11/16" 4.26 |
| 8" | 8 5/8" 1.88 | 8 1/4" 2.12 |
| 1" X 2" | 15/16" X 2 1/16" 61.96 | 7/8" X 1 15/16 69.82 |
| 1" X 4" | 15/16" X 4 1/4" 30.98 | 7/8" X 4" 34.91 |
| 1" X 6" | 15/16" X 6" 22.13 | 7/8" X 5 11/16" 24.77 |
| 1" X 8" | 15/16" X 8 5/8" 15.49 | 7/8" X 8 1/4" 17.45 |
| 2" X 4" | 2 1/16" X 4 1/4" 15.05 | 1 15/16" X 4" 16.92 |
| 2" X 6" | 2 1/16" X 6" 10.75 | 1 15/16" X 6" 12.01 |
| 2" X 8" | 2 1/16" X 8 5/8"" 7.52 | 1 15/16" X 8 1/4" 8.46 |
| 3" X 6" | 2 15/16" X 6" 7.67 | 2 3/4" X 5 11/16" 8.62 |
| 3" X 8" | 2 15/16" X 8 5/8" 5.37 | 2 3/4" X 8 1/4" 6.07 |
| 4" X 8" | 4 1/4" X 8 5/8" 3.76 | 4" X 8 1/4" 4.23 |
1/8" Grout spacing is assumed for # per sq. ft. numbers presented here
4"X8"
w
2"
3"X6"
6"X12"
4"X8"
X
X
X
Triangle (right)
Triangle (equilateral)
X
3"
4"
Clipped right triangles:
Diamond
h
Clipped diamond:
Rectangle
Square
Clipped rectangles:
Upper right
Lower right
Clipped square:
90 deg.
lower right
Y
Bullnose (surface bullnose):
Specify side(s) of tile to be bullnosed. Bullnose edge is rounded with a radius similar to tile thickness (approximately 1/2 inch).
Corner bends:
We can provide tile with 90 degree bends. Specify length to be covered by tile on each side of bend.
Field Tile actual sizes:
Field Tile Sizes & Shapes
Furnace Hill Tile
Clipped corners:
Specify size and shape of "dot" tile for which the clip is to be made. Clips can have assymetric and round shapes to accommodate different "dot" shapes.
Arabesque
Tripoli
5"X5"
6"X5"
3.5"X6"
image coming soon
image coming soon